Storage tanks / domestic water heating

Domestic water storage tank for heating domestic water. Steel tank, enamel painted on the inside, with protection against corrosion and thermal insulation. A built-in enamel painted heat exchanger.

Range of applications: heating with a heat source, ideally a gas, oil or biomass-based boiler - for new buildings and renovations.

Domestic water storage tank for heating domestic water. Steel tank, enamel painted on the inside, with protection against corrosion and thermal insulation. A special built-in enamel painted heat exchanger.

Range of applications: heating with a heat source, ideally a heat pump or a gas, oil or biomass-based boiler - for new buildings and renovations.

Domestic water storage tank for heating domestic water. Stainless steel storage tank with thermal insulation. A built-in heat exchanger (flat section coil) made of stainless steel.

Range of applications: heating with a heat source, ideally a gas, oil or biomass-based boiler - for new buildings and renovations.

Domestic water storage tank for heating domestic water. Stainless steel storage tank with thermal insulation. A built-in heat exchanger with a large surface area (flat section coil) made of stainless steel.

Range of applications: heating with a heat source, ideally a heat pump or a gas, oil or biomass-based boiler - for new buildings and renovations.

Domestic water storage tank for heating domestic water. Steel tank, enamel painted on the inside, with protection against corrosion and thermal insulation. Two built-in enamel painted heat exchangers.

Range of applications: heating with two heat sources, e.g. a gas, oil or biomass-based boiler and a thermal solar plant - for new buildings and renovations.

Domestic water storage tank for heating domestic water. Steel tank, enamel painted on the inside, with protection against corrosion and thermal insulation. Two special built-in enamel painted heat exchangers.

Range of applications: heating with two heat sources, ideally a heat pump and a thermal solar plant - for new buildings and renovations.

Turnkey domestic water storage tank with built-in air/water heat pump for heating domestic hot water. Steel tank, enamel painted on the inside, with protection against corrosion and thermal insulation. Version with additional built-in standard heat exchanger also available.

Range of applications: heating with a heat pump and another optional heat source - for new buildings and renovations.

Turnkey station for heating domestic water using the buffer storage principle. With stainless steel plate heat exchangers, copper soldering. Built-in TopTronic E system controller.

Range of application: high hot water requirements. Combination with CombiVal E or CombiVal C storage tank - for new buildings and renovations.

Turnkey station for heating domestic water using the buffer storage principle. With stainless steel plate heat exchangers, copper-free. Built-in TopTronic E system controller.

Range of application: high hot water requirements. Combination with CombiVal E or CombiVal C storage tank - for new buildings and renovations.

Charging tank made of steel enamelled inside, with protection against corrosion and with thermal insulation for storing and for heating domestic water in combination with calorifier charging module.

Range of applications: combination with a heat source and the TransTherm aqua L or LS charging module - for new buildings and renovations.

Charging tank made from stainless steel with thermal insulation for storage and heating of domestic hot water in combination with calorifier charging module.

Range of applications: combination with a heat source and with the TransTherm aqua L or LS charging module - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With stainless steel plate heat exchanger, copper-soldered. Wall-mounted, TopTronic E system controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with an energy buffer tank. Flats, single family homes - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With stainless steel plate heat exchanger, copper-free. Wall-mounted, TopTronic E system controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with an energy buffer tank. Flats, single family homes – for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With stainless steel plate heat exchanger, copper-soldered. Mounted on a stand frame, with built-in TopTronic E system controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with an energy buffer tank. Blocks of flats, commerce, industry - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With two stainless steel plate heat exchangers, copper soldering. Mounted on a stand frame, with built-in TopTronic E system controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with two buffer storage tanks. Flats, single family home - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With two stainless steel plate heat exchangers, copper-free. Mounted on a stand frame, with built-in TopTronic E system controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with two buffer storage tanks. Flats, single family home - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With stainless steel plate heat exchanger, copper-soldered. Wall-mounted, built-in thermal controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with an energy buffer tank. Flats, single family homes - for new buildings and renovations.

Turnkey station for heating domestic water using the continuous flow principle. With stainless steel plate heat exchanger, copper-soldered. Wall-mounted, built-in thermal controller.

Range of applications: centralised or decentralised domestic water heating with high hygiene standards, combined with an energy buffer tank. Single family homes, dual occupancy homes - for new buildings and renovations.

Steel buffer storage tank for storing heating water. Steel storage tank with thermal insulation.

Range of applications: single family homes or dual occupancy homes - for new buildings and renovations.

Steel buffer storage tank for storing heating water. Steel storage tank with thermal insulation.

Range of applications: single family homes or dual occupancy homes - for new buildings and renovations.

Steel buffer storage tank for storing heating water. Steel storage tank with thermal insulation.

Range of applications: blocks of flats, commercial settings - for new buildings and renovations.

Steel buffer storage tank for storing heating water. Steel storage tank with thermal insulation.

Range of applications: blocks of flats, commercial settings - for new buildings and renovations.

The electric heating element consists of three U-shaped round heating rods and a thermostat protection tube mounted in a 1½″ brass nipple, a flat seal is included in the scope of delivery.

Due to the insulated installation of the round heating rods, the units are also suitable for enamelled calorifiers.

The unheated zone is 150 mm for all outputs.

The electric heating element consists of three U-shaped round heating rods, each pressed into a press nipple. These are screwed onto a stainless steel flange with thermostat protection tube, a flange seal (EPDM) is included in the scope of delivery.

A food-safe plastic disc (PVDF) serves as insulation.

The unheated zone is 100 mm for all outputs.

The electric heating element consists of three U-shaped round heating rods, which are mounted in a conical brass nipple 1½″ insulated by means of food-safe plastic sleeves.

Thanks to the insulated installation of the round heating rods, the units are also suitable for enamelled calorifiers.

The unheated zone is 150 mm for all outputs.

The electric heating element consists of three U-shaped round heating rods, each pressed into a press nipple. These are screwed with the immersion sleeve onto a steel flange. A food-safe plastic disc serves as insulation.

The unheated zone is 70 mm for all outputs.

The electric heating element consists of three U-shaped round heating rods, each pressed into a press nipple. These are screwed with the immersion sleeve onto a steel flange. A food-safe plastic disc serves as insulation.

The unheated zone is 70 mm for all outputs.

The electric heating element consists of three U-shaped round heating rods, each pressed into a press nipple. These are screwed with the immersion sleeve onto a steel flange. A food-safe plastic disc serves as insulation.

The unheated zone is 70 mm for all outputs.