Content added to your bookmarks in MyHoval

File added to your bookmarks in MyHoval

There has been an error while adding Content to your bookmarks in MyHoval

How much fresh air has to be provided for Sports Halls ventilation? - Our top tips for planners

How much fresh air has to be provided for Sports Halls ventilation? - Our top tips for planners

The quantity of air which has to be provided depends on the purpose of the hall.

The table below shows the most important dimensions of the most common hall types. The individual areas or courts in multipurpose facilities are usually separated by means of curtains or sliding partitions and are therefore to be viewed individually from the point of view of ventilation. This means that as a rule, the areas for which air distribution has to be provided will measure 15 x 27 m or 22 x 22 m.
60 m³/h of fresh air per athlete and 20 m³/h of fresh air per spectator is the average amount of air required, but as the number of people using such a hall varies greatly from day to day and at different times of day, it makes sense to consider installing a ventilation system which can adapt to suit these widely varying requirements in operation.

Case Study:

The sport hall in Goldbach (Germany), is a typical dual-purpose hall with a narrow spectator area. The supporting structure consists of wooden trusses, making the installation of ducts impossible. The operators therefore chose a decentralised ventilation system consisting of one unit per court, each with energy recovery and an air flow rate of 5500 m³/h. These units also supply the heating for the hall. The integrated Air-Injector air outlets with high induction represent an extremely effective solution. In the occupied area of the courts, they provide intensive, draught-free air distribution which automatically ensures an even distribution of temperature. And with a measured stratification of only 0.15 K/m, they save energy as a result of the low temperature difference between floor and ceiling.

Picture 1: The sports hall is ventilated and heated by means of decentralised units.

As the hall is a multipurpose facility which is also used for "quieter" events, the units are equipped with supply and extract air silencers. And the use of two-speed fans allows the system to be adjusted for varying numbers of people. The two-speed function can also be used to reduce the operating sound level where required.

Picture 2: RoofVent units are roof ventilation units for supplying fresh air and removing "used" air.

Picture 3: The units are equipped with supply and extract air silencers.

The plant is controlled and regulated by means of a control system especially developed to meet the requirements of decentralised systems. It allows different operating modes in the different areas of the hall, tailored to the varying uses to which the hall is put at different times. For example, it is possible to supply one court with fresh air while the other is maintained at a lower temperature if it is not in use. Another important feature of the control system is the automatic adjustment of the air outlets in dependence on the difference between supply and room air temperature.

Summary:

Experience with other sports halls has shown that an Air-Injector air outlet provides excellent ventilation and temperature distribution even for courts measuring 15 x 27 m. Long-range nozzles do not perform so successfully in tests, as this method of air distribution cannot provide such even distribution of temperature.

The advantages offered by a decentralised system make it ideal for use in
sports halls and multipurpose halls. The fact that no ducting is required, the low weight and compact design of the units make for a considerable weight-saving of up to 70 % in comparison with a centralised unit, and this makes the overall supporting structure of the hall lighter. In particular, the low weight and compact design mean that the system is also easy to incorporate into the roof structure when carrying out conversion work on existing halls. There is no need for an additional equipment room.

The ventilation and heating units are supplied ready-to-connect, fully assembled and pre-wired, reducing the cost and time required for design. The same applies to their installation, which is also quick and easy.

In short, their high flexibility makes decentralised systems ideally suited to meeting the widely varying requirements of sports halls and multipurpose halls – and all that at a very competitive price.


If you would like to find out more information about our ventilation systems, you can contact Eduard Kovac on 01636 593415 or Eduard.Kovac@hoval.co.uk